Disable FortiCare force registration

Connect console cable with baud 9600

Reboot firewall and enter boot menu

exec reboot



FortiGate-121G (00:FF-08.FF.2021)
Ver:06000222
Serial number: FG121GTK25123456
CPU: 2300 MHz
Total RAM: 16 GB
Initializing boot device...
Initializing MAC...
Please wait for OS to boot, or press any key to display configuration menu...

[C]: Configure TFTP parameters.
[R]: Review TFTP parameters.
[T]: Initiate TFTP firmware transfer.
[F]: Format boot device.
[I]: System information.
[B]: Boot with backup firmware and set as default.
[Q]: Quit menu and continue to boot.
[H]: Display this list of options.

Enter C,R,T,F,I,B,Q,or H: I


[S]:  Set serial port baudrate.
[R]:  Set restricted mode.
[T]:  Set menu timeout.
[C]:  Set FortiCare registration.
[I]:  Display system information.
[E]:  Reset system configuration.
[P]:  Normal POST test.
[Q]:  Quit this menu.
[H]:  Display this list of options.

Enter S,R,T,C,I,E,P,Q,or H: C

[1]:  Not Enforce
[2]:  Enforce
Enter FortiCare registration setting [2]: 1

Enter S,R,T,C,I,E,P,Q,or H: Q

[C]: Configure TFTP parameters.
[R]: Review TFTP parameters.
[T]: Initiate TFTP firmware transfer.
[F]: Format boot device.
[I]: System information.
[B]: Boot with backup firmware and set as default.
[Q]: Quit menu and continue to boot.
[H]: Display this list of options.

Enter C,R,T,F,I,B,Q,or H: QCode language: CSS (css)